GPM: Countdown to Launch

  • Released Thursday, February 20, 2014
View full credits

GPM is a joint mission between NASA and the Japan Aerospace Exploration Agency (JAXA). The Core Observatory will link data from a constellation of current and planned satellites to produce next-generation global measurements of rainfall and snowfall from space.

The GPM mission is the first coordinated international satellite network to provide near real-time observations of rain and snow every three hours anywhere on the globe. The GPM Core Observatory anchors this network by providing observations on all types of precipitation. The observatory's data acts as the measuring stick by which partner observations can be combined into a unified data set. The data will be used by scientists to study climate change, freshwater resources, floods and droughts, and hurricane formation and tracking.

GPM's Last Stop Before Orbit

Art Azarbarzin, the NASA/GPM Project Manager, and Mashahiro Kojima, the JAXA GPM/DPR Project Manager, reflect on the long journey the GPM Core Observatory spacecraft has taken to reach its last stop before orbit, the Tanegashima Space Center, Japan.

Greetings from Minamitane!

For complete transcript, click here.

Fairing Encapsulation Compete

Footage courtesy of JAXA/MHI

On Feb. 11, the Core Observatory was moved into the spacecraft fairing assembly building and into the Encapsulation Hall. Final inspections and preparations were completed for the installation into the fairing, which began on Feb 13. The fairing is the part of the rocket that will contain the spacecraft at the top of the H-IIA rocket.

The encapsulation process for the H-IIA is very different than for most U.S. rockets. For U.S. rockets, the fairing is usually in two pieces that close around the payload like a clamshell. To install the GPM Core Observatory into the fairing of the H-IIA rocket, first the Core Observatory and the Payload Attach Fitting (PAF) are set up in scaffolding in the Encapsulation Hall. Then, the fairing is lifted above and lowered onto the fitting. When only a few feet remain above the final position, stanchions support the fairing while technicians go inside to complete the electrical connections. When this is completed, they remove the stanchions and lower the fairing to its final position, where it is bolted in place.

Waiting for Launch

Credits

Please give credit for this item to:
NASA's Goddard Space Flight Center

This page was originally published on Thursday, February 20, 2014.
This page was last updated on Wednesday, May 3, 2023 at 1:51 PM EDT.

Missions

This page is related to the following missions:

Series

This page can be found in the following series: