Hubble Facilities

  • Released Friday, December 2, 2016
View full credits

NASA’s Goddard Space Flight Center is home to the Hubble Space Telescope Operations Project, the government’s team of technical managers and scientists who oversee all aspects of the Hubble mission. Under its direction, an integrated group of civil servants and contractors at Goddard collectively known as the operations team is responsible for Hubble’s mission operations—those functions of the mission that operate together to assure the health, safety, and performance of the spacecraft. Examples include monitoring and adjusting the spacecraft’s subsystems (e.g. power, thermal, data management, pointing control, etc.), flight software development, sustaining engineering of the control center hardware and software, and systems administration of the network and ground system components.

A separate contractor team at the Space Telescope Science Institute in Baltimore is similarly responsible for science operations—the functions necessary to award telescope time, schedule observations, calibrate the received data, and archive the datasets. Working closely together, Goddard and the STScI operate Hubble 24 hours a day, 7 days a week, though most of the commanding to the telescope and receipt of its science data is accomplished by computers via automated operations.

Hubble VEST - 4k B-Roll and high-res pictures

Still images credit: NASA/GSFC/Pat Izzo

The Vehicle Electrical Systems Test, or VEST, is a high fidelity mock-up of the Hubble Space Telescope. The VEST is used in three primary ways. First, it is employed to troubleshoot problems seen on the spacecraft by simulating the conditions under which the anomaly was observed and to test possible solutions. Second, it is used to verify updates to the software, commands, and engineering parameters before they are transmitted from the control center to the spacecraft. This process includes a thorough test of the ground procedures used for uplinking and installing these items. Finally, the VEST is used to verify operational procedures before they are executed by the flight operations team.

Prior to each of the five servicing missions to Hubble, the VEST structure was a critical element for ensuring the fit of new spaceflight hardware in the spacecraft. Many of the items taken aloft by the astronauts to Hubble were first installed into the VEST structure to verify mechanical, electrical, and software compatibility with the observatory.

Hubble STOCC MOR - 4k B-Roll

The Hubble Space Telescope is operated out of the Space Telescope Operations Control Center, the STOCC, at the NASA Goddard Space Flight Center. In the STOCC’s Mission Operations Room, computer programs autonomously acquire communications with the telescope, monitor telemetry from the spacecraft, manage Hubble’s science and engineering data recorders, and load the on-board computers with command sequences. Personnel manually take over for special operations.

Hubble STOCC OSR - 4k B-Roll

Before Hubble commands are sent through the Mossion Operations Room, most Hubble operations are tested out and refined in the Operations Support Room. Personnel interact with a high-fidelity spacecraft simulator to test any planned configuration changes, flight or ground software updates, contingency procedures, or special commanding. The operations team continuously examines the performance of the spacecraft’s subsystems, looking for signs of degradation and identifying ways to extend the mission’s lifetime.

For More Information

See http://www.nasa.gov/content/hubble-mission-operations

Credits

Please give credit for this item to:
NASA's Goddard Space Flight Center

This page was originally published on Friday, December 2, 2016.
This page was last updated on Wednesday, May 3, 2023 at 1:48 PM EDT.

Missions

This page is related to the following missions: