ARTEMIS Mission

  • Released Wednesday, October 27, 2010
View full credits

An extension to the THEMIS mission is to send two of the THEMIS satellites into lunar orbit to study the magnetospheric environment near the Moon. The new mission is named ARTEMIS (Acceleration, Reconnection Turbulence, and Electrodynamics of Moon's Interaction with the Sun).

The outermost two THEMIS spacecraft (Probes B and C) are on route to the Moon, where they will become the ARTEMIS mission's Probes 1 and 2 (red and green, respectively) , tasked with studying not only the tenuous cavity carved out by the Moon in the supersonic solar wind, but also reconnection, particle energization and turbulence in both the solar wind and the Earth's distant magnetotail at lunar distance. ARTEMIS stands for Acceleration, Reconnection, Turbulence, and Electrodynamics of the Moon's Interaction with the Sun.

Thanks to careful planning, sufficient fuel remained on both spacecraft at the successful completion of their primary mission to raise their apogees to lunar distance, where they could receive the multiple gravitational assists needed to fling the spacecraft first beyond the Moon and then assist them in entering in orbits that parallel that of the Moon at the L1 and L2 Lagrange points. Maneuvers in April 2011 enable the spacecraft to enter into prograde and retrograde lunar orbits (the 'braided' motion).

The direction of the Sun is indicated by the yellow arrow.

This visual opens with a view of the five THEMIS satellites in orbit around the Earth.  Maneuvers have already boosted the apogee of THEMIS-B to the orbit of the Moon, and THEMIS-C is still in the process.

This visual opens with a view of the five THEMIS satellites in orbit around the Earth. Maneuvers have already boosted the apogee of THEMIS-B to the orbit of the Moon, and THEMIS-C is still in the process.

THEMIS-B gets a gravity assist from the Moon, sending it into an orbit above and below the orbital plane of the Moon.  The ARTEMIS phase of the mission officially begins and the spacecraft are relabeled as such.

THEMIS-B gets a gravity assist from the Moon, sending it into an orbit above and below the orbital plane of the Moon. The ARTEMIS phase of the mission officially begins and the spacecraft are relabeled as such.

We move the camera into position with a better view along the Moon's orbit plane so we can get a better sense of the 3-D nature of the orbits.

We move the camera into position with a better view along the Moon's orbit plane so we can get a better sense of the 3-D nature of the orbits.

The camera pulls back, high above the Earth's north pole and the Moon's orbital plane.  We see the lunar gravity-assist has sent ARTEMIS-1 far beyond the Moon.  Meanwhile, ARTEMIS-2 is about to receive its first lunar gravity-assist.

The camera pulls back, high above the Earth's north pole and the Moon's orbital plane. We see the lunar gravity-assist has sent ARTEMIS-1 far beyond the Moon. Meanwhile, ARTEMIS-2 is about to receive its first lunar gravity-assist.

...maneuver to match their orbit with the orbit of the Moon.  In this phase, they begin a gravitational dance between the lunar L1 & L2 Lagrange points.

...maneuver to match their orbit with the orbit of the Moon. In this phase, they begin a gravitational dance between the lunar L1 & L2 Lagrange points.

We fade in the magnetopause, the outer boundary of the Earth's magnetosphere.   With each orbit of the Moon, the ARTEMIS satellites pass through the magnetosphere with the Moon, sampling the interaction of the Moon with the electromagnetic environment.

We fade in the magnetopause, the outer boundary of the Earth's magnetosphere. With each orbit of the Moon, the ARTEMIS satellites pass through the magnetosphere with the Moon, sampling the interaction of the Moon with the electromagnetic environment.

We now move the camera into a position to 'chase' the Moon, to better observe the maneuvers which will complete ARTEMIS' capture by lunar gravity.  The ARTEMIS trails are transformed into a coordinate system which travels with the Moon.  To see an illustration of how moving coordinate systems impact the visualization of trails, see "LRO Transition from Earth-Centered to Moon-Centered Coordinates"

We now move the camera into a position to 'chase' the Moon, to better observe the maneuvers which will complete ARTEMIS' capture by lunar gravity. The ARTEMIS trails are transformed into a coordinate system which travels with the Moon. To see an illustration of how moving coordinate systems impact the visualization of trails, see "LRO Transition from Earth-Centered to Moon-Centered Coordinates"

Looking down on the Moon far above its northern pole, we see both ARTEMIS spacecraft traveling around the Earth-Moon L1 point.

Looking down on the Moon far above its northern pole, we see both ARTEMIS spacecraft traveling around the Earth-Moon L1 point.

A view from below the Moon's orbital plane, where we seen the Moon's sunlit farside and the Earth's magnetosphere in the background.

A view from below the Moon's orbital plane, where we seen the Moon's sunlit farside and the Earth's magnetosphere in the background.



Credits

Please give credit for this item to:
NASA/Goddard Space Flight Center Scientific Visualization Studio

Release date

This page was originally published on Wednesday, October 27, 2010.
This page was last updated on Wednesday, May 3, 2023 at 1:53 PM EDT.


Missions

This page is related to the following missions:

Datasets used

Note: While we identify the data sets used on this page, we do not store any further details, nor the data sets themselves on our site.