NCCS Hyperwall Show: Push in with GEOS-5 Modeled Clouds at 3.5-km Global Resolution and 10 Minute Interval

  • Released Tuesday, June 1, 2010
View full credits

This visualization shows clouds from a simulation using the Goddard Earth Observing System Model, Verison 5 (GEOS-5). The global atmospheric simulation ran at 3.5 km per grid cell and covered a single day: January 2, 2009. The results of the simulation were written out at 10 minute intervals. Since there is only one day of simulation data, the sequence of clouds repeats several times. The white flash indicates the sequence is about to repeat.

This version of the visualization was created for display on the NASA Center for Climate Science (NCCS.) hyperwall. This hyperwall is a set of 15 tiled high definition displays constisting of 5 displays across by 3 displays down. The full resolution of all combined displays is 6840 pixels accross by 2304 pixels down. This movie was rendered at full resolution, then diced up into images for display on each screen.

This visualization is similar to a visualization shown at the Supercomputing 2009 conference available in entry #3659. The differences between that one and this one are: resolution, aspect ratio, and camera path (due to the aspect).

Fully composited versionof GEOS-5 modeled clouds at 3.5-km (all tiles together)

The large animation above is diced-up into smaller pieces that can be played on the hyperwall. Each piece is named according to a standard spreadsheet convention with a1 at the upper left and e3 at the lower right. This image illustrates this naming convention used in the diced-up frame sets below.

The large animation above is diced-up into smaller pieces that can be played on the hyperwall. Each piece is named according to a standard spreadsheet convention with a1 at the upper left and e3 at the lower right. This image illustrates this naming convention used in the diced-up frame sets below.

Display a1 of GEOS-5 modeled clouds

Display a2 of GEOS-5 modeled Clouds

Display a3 of GEOS-5 modeled Clouds

Display b1 of GEOS-5 modeled Clouds

Display b2 of GEOS-5 modeled Clouds

Display b3 of GEOS-5 modeled Clouds

Display c1 of GEOS-5 modeled Clouds

Display c2 of GEOS-5 modeled Clouds

Display c3 of GEOS-5 modeled Clouds

Display d1 of GEOS-5 modeled Clouds

Dsiplay d2 of GEOS-5 modeled Clouds

Display d3 of GEOS-5 modeled Clouds

Display e1 of GEOS-5 modeled Clouds

Dsiplay e2 of GEOS-5 modeled Clouds

Display e3 of GEOS-5 modeled Clouds

Credits

Please give credit for this item to:
NASA/Goddard Space Flight Center Scientific Visualization Studio
The Blue Marble Next Generation data is courtesy of Reto Stockli (NASA/GSFC) and NASA's Earth Observatory.

This page was originally published on Tuesday, June 1, 2010.
This page was last updated on Sunday, October 13, 2024 at 10:01 PM EDT.

Missions

This page is related to the following missions:

Series

This page can be found in the following series:

Datasets used

Note: While we identify the data sets used on this page, we do not store any further details, nor the data sets themselves on our site.